5895400 - Shop-Vac® 4 Gallon* 4.5 Peak HP** All Around EZ® Wet Dry Vac

5895400 - Shop-Vac® 4 Gallon* 4.5 Peak HP** All Around EZ® Wet Dry Vac

Regular price
Sale price
Regular price
Sold out
Unit price

The Shop-Vac® 4 Gallon* 4.5 Peak HP** All Around EZ® Wet Dry Vac has the power of a full size vacuum with the convenience of a hand held model. Use this vac "All Around®" the house to clean carpets, stairs, kitchens, blinds, ceiling fans, workshops, vehicles, or anywhere you have a wet or dry mess. Attach the hose to the rear blower port to blow leaves off the porch or dirt out from under appliances.


  • Cord Length: 18 Feet
  • Hose Size: 1.25" Diameter
  • Warranty: 3 Years
  • Wall Mountable Design
  • Hand Held Design
  • Blower Feature


  • 7-foot by 1.25-inch diameter hose with extension end (90238)
  • two 1.25-inch diameter extension wands
  • dual surface selector nozzle (90632)
  • crevice tool (90616)
  • gulper nozzle (90619)
  • round brush (90615)
  • wall bracket
  • onboard tool storage


  • Foam Sleeve (90585 Type R)
  • 4 Gallon* Disposable Filter Bag (90660 Type LL)


      • Airflow, Max: 75 CFM
      • Sealed Pressure: 56 Inches
      • Electrical Ratings: 120V 60Hz 9.0 Amps
      • Peak Air Watts: 160

      ASTM tested with 1.25-inch Shop-Vac® diameter hose

      Horsepower Rating
      **"Peak Horsepower" (PHP) is a term used in the wet-dry vacuum industry for consumer comparison purposes. It does not denote the operational horsepower of a wet-dry vacuum but rather the horsepower output of a motor, including the motor’s inertial contribution, achieved in laboratory testing. In actual use, Shop-Vac motors do not operate at the peak horsepower shown.

      CFM (Cubic Feet Per Minute)
      CFM is a measure of the quantity of air moved by the vacuum motor at a particular system load, such as 2-1/2" orifice. Your actual system load is determined by the type, size and length of the hose used, the accessory tool used and the filter system used. A dirty filter system can drastically affect the suction and air flow. The filters need to be cleaned regularly and replaced as necessary to avoid reduced suction and air flow.

      SP (Sealed Pressure)
      Suction pressure represents how far up a glass tube a vacuum motor will lift a column of water. This function is measured in inches. Maximum suction pressure or sealed water lift is obtained at zero air flow. Suction pressure decreases as air flow increases.

      Vacuum Performance
      Vacuum performance or air power is the rate of work performed by a vacuum cleaner. Air power is a function of suction and air flow at an operating point. Air power is reduced by dirty filters, leaks and attachments used.

      Alt 14 Gallon 6 Peak HP The perfect tool to have on hand for the unexpected. Buy Online